The Eee Edit Screen; Poe - ZyXEL Communications GS1900 Series User Manual

The following table describes the labels in this screen.
Table 62 Configuration > Port > EEE > EEE
LABEL
EEE
Edit
Port
State

19.3.1 The EEE Edit Screen

Use this screen to configure Switch port EEE settings. Click Configuration > Port > EEE > EEE >
Edit to open this screen.
Figure 96 Configuration > Port > EEE > EEE > Edit
The following table describes the labels in this screen.
Table 63 Configuration > Port > EEE > EEE > Edit
LABEL
EEE
Port List
State
Apply
Cancel

19.4 PoE

The Switch supports both the IEEE 802.3af Power over Ethernet (PoE) and IEEE 802.3at High Power
over Ethernet (PoE) standards. The Switch is Power Sourcing Equipment (PSE) because it provides
a source of power via its Ethernet ports, and each device that receives power through an Ethernet
port is a Powered Device (PD).
Chapter 19 Configuration: Port
DESCRIPTION
Select this check box to configure the properties of a port. Click the Edit button change the
properties of the port.
Displays the port index number.
Displays the port status as enabled or disabled.
DESCRIPTION
Displays the list of port index numbers that are being configured.
Select Enable to designate the ports as EEE or Disable to not designate them as EEE.
Click Apply to save the changes.
Click Cancel to discard the changes.
GS1900 Series User's Guide
102