The Add/Modify Mst Screen; The Mst Port Screen - ZyXEL Communications GS1900 Series User Manual

Table 115 Configuration > Spanning Tree > MST (continued)
LABEL
VLAN Count
Priority
Action
Edit
Delete

26.2.8 The Add/Modify MST Screen

Use this screen to configure the MST settings. Click Configuration > Spanning Tree > MST >
Add/Modify to open this screen.
Figure 150 Configuration > Spanning Tree > MST > Add/Modify
The following table describes the labels in this screen.
Table 116 Configuration > Spanning Tree > MST > Add/Modify
LABEL
MST Instance
MST ID
VLAN List
Priority
Apply
Cancel

26.2.9 The MST Port Screen

Use this screen to view the MST Port settings. Click Configuration > Spanning Tree > MST
Port to open this screen.
Chapter 26 Configuration: Spanning Tree
DESCRIPTION
Displays the VLAN count.
Displays the priority for each port here.
Click Edit to make changes to the entry.
Click Delete to remove the entry.
DESCRIPTION
Displays the Multiple Spanning Tree Instance (MSTI) ID(s).
Display a list of MSTI VLANs.
Displays MSTI bridge ID priority value.
Click Apply to save the changes.
Click Cancel to discard the changes.
GS1900 Series User's Guide
156