ZyXEL Communications GS1900 Series User Manual page 158

Figure 152 Configuration > Spanning Tree > MST Port > Edit
The following table describes the labels in this screen.
Table 118 Configuration > Spanning Tree > MST Port > Edit
LABEL DESCRIPTION
STP MST Port
MST ID Displays the MST ID number.
Port List Enter the index number of the MTP port(s).
Priority Configure the priority for each port here.
Priority decides which port should be disabled when more than one port forms a loop in a
switch. Ports with a higher priority numeric value are disabled first. The allowed range is
between 0 and 255 and the default value is 128.
Internal Path Enter the internal path cost. Enter 0 for Auto.
Cost (0=Auto)
Apply Click Apply to save the changes.
Cancel Click Cancel to discard the changes.
Chapter 26 Configuration: Spanning Tree
GS1900 Series User's Guide
158