Diagnostics
Additional Functions of the Diagnostics Program
Checking Other
Displays and
Data
Main Program
32
In addition to performing the three network adapter tests, the
diagnostics program can also read out network adapter-specific data
that may be useful for pinpointing the causes of failure.
You can:
read sensor data
read configuration data
read and write VPD data
read and write Flash EPROM data
To start the main program, proceed as follows:
1.
Boot to DOS and wait for the prompt.
2.
Insert the installation CD-ROM into the CD-ROM drive of the
computer in which the network adapter is installed.
3.
Type the letter of your CD-ROM drive (for example, D:)
4.
Go to the appropriate product directory and type diag2971.
5.
Press <Enter>.