Installing A Network Adapter Driver On Novell Netware 5.X/6.X; Files Needed For Installation; New Server Installation - Allied Telesis AT-2450 Series Installation Manual

Installing a Network Adapter Driver on Novell NetWare 5.x/6.x

Files Needed for
Installation
New Server
Installation
This section contains the procedure for installing a network adapter
driver on a system running Novell NetWare 5.x/6.x.
The .LDI file and the .LAN file for your adapter must be present to
succesfully complete installation. The location for each Allied Telesyn
adapter are as follows:
Adapter Card
AT-2400 Series
AT-2500/AT-2501 Series
AT-2450/AT-2451 Series,
AT-2700/AT-2701 Series,
AT-2745/AT-2746 Series,
AT-2915 Series, AT-2930
Series
AT-2970, AT-2971 Series
1. For additional AT-2970 and AT-2971 parameter information, refer to the AT297x.txt file.
The NetWare 5 utility NWCONFIG provides the user with the abitlity to
add additional network adapter cards. At the system console, type
NWCONFIG
1. Select Driver Options then Configure Network Driver.
2. Select an Additional Driver.
The NWCONFIG displays a list of the available drivers.
3. Press <Insert> to specify a driver not listed.
4. Insert the CardAssistant CD or the Driver Installation Disk into the
appropriate drive.
If you are using the CardAssistant CD, the names and locations of the
adapter drivers are as follows:
Adapter Card
AT-2400 Series
AT-2500/AT-2501 Series
Network Adapter Card Installation Guide - Book II
Location
\drivers\at2400\netware\
\drivers\at2500\netware\
\drivers\at2701\netware\
\drivers\at29xx\netware\
drivers\at2971\netware\
Location
\drivers\at2400\netware\
\drivers\at2500\netware\
1
55