Reading Sensor Data - Allied Telesis AT-2450 Series Installation Manual

Reading Sensor
Data
The Main Menu as shown in Figure 8 is displayed:
Figure 8 Diagnostic Window (3 of 5)
6. Select the appropriate item from the menu.
7. To quit the program, select EXIT in the Main Menu.
This option is automatically offered for selection if you did not select
a menu item previously.
To read sensor data, perform the following procedure:
1. Start the main program. Refer to
instructions.
2. Select Show Sensors in the Main Menu. A separate window will be
displayed for the following sensor data:
Temperature of the board
Voltage on the PCI card
Voltage on the PCI I/O lines
Other supply voltages
In the Main Menu, Show Sensors changes to Hide Sensors.
Network Adapter Card Installation Guide - Book II
Main Program on page 32 for
33