Running Diagnostics; For The At-24Xx, At-25Xx, At-27Xx, At-2915,And At-2930 Series - Allied Telesis AT-2400 Series Installation Manual

Troubleshooting

Running Diagnostics

For the
AT-24xx,
AT-25xx,
AT-27xx,
AT-2915,and
AT-2930 Series
108
The diagnostics utility is useful for setting the Speed/Duplex and
BootROM. You can also insure proper operation of the network adapter
card. This utility is located on the CardAssistant CD or the driver
installation disk.
Speed/Duplex
This option allows the user to configure speed and duplex to one of the
available options. The options for speed and duplex vary depending on
adapter model
BootROM Port
The BootROM port setting is only for multi-port AT-2450, AT-2700, and
AT-2745 Series PCI Ethernet Adapter Cards without integrated Manage
BootROM, specifically the AT-2450FTX, AT-2700FTX, and AT-2745FX.
When using one of these three adapters in a BootROM configuration, it
may be necessary to change these settings. For any other AT-2450/
AT-2700 Series PCI Ethernet Adapter Card the BootROM Port setting
should not be changed.
BootROM
This feature is only available for the AT-2500 and AT-2501TX Series
Adapters. Using the Diagnostics program (diag25.exe) set BootROM to
enable.
Diagnostics
There are two diagnostic utilities, Card Test and Network Test.
Card Test
This test checks several parts and functions of the adapter card to
ensure proper operation of the adapter card.
Network test
This test allows the user to send and receive raw packets without
a driver loaded to check the card functionality.