Removing An Adapter Driver From Novell Netware 5/6 Server - Allied Telesis AT-2450 Series Installation Manual

Removing an
Adapter Driver
from Novell
Netware 5/6
Server
This section contains the procedure for removing a network adapter
driver from a system running Novell Netware 5 or Netware 6 Server.
To remove a driver, you can either use the NWCONFIG program supplied
with NetWare or edit the AUTOEXEC.NCF in the SYS:SYSTEM directory
with a text editor. The procedure below explains how to remove a driver
using the NWCONFIG program.
1. Type NWCONFIG at the server console to bring up the installation
module.
2. Select Driver Options and press Return.
3. Select Deselect a selected driver from the next menu and press
Return. This moves the highlight to the installed adapter(s).
4. Selct the adapter you wish to remove.
5. Press Return again to remove the selected driver.
Network Adapter Card Installation Guide - Book II
59