Allied Telesis AT-2450 Series Installation Manual page 66

Linux
66
rx_flow_control
Enables or disables receiving flow control (pause) frames. This
parameter is used together with auto_flow_control. The valid
values are:
0 pause receive disabled (default)
1 pause receive enabled if auto_flow_control
is set to 0, or pause receive advertised if
auto_flow_control is set to 1
tx_flow_control
Enables or disables transmitting flow control (pause) frames. This
parameter is used together with auto_flow_control.
The valid values are:
0 pause transmit disabled (default)
1 pause transmit enabled if auto_flow_control
is set to 0, or pause transmit advertised if
auto_flow_control is set to 1
auto_flow_control
Enables or disables autonegotiation of flow control. This
parameter is used together with rx_flow_control and
tx_flow_control to determine the advertised flow control
capability.
The valid values are:
0 flow control autonegotiation disabled
(default)
1 flow control autonegotiation enabled with
capability specified in rx_flow_control and
tx_flow_control (only valid if line_speed is
set to 0)