Installing A Network Adapter Driver; Installing Ndis3, Ndis2, Odi Drivers - Allied Telesis AT-2450 Series Installation Manual

Microsoft Windows for Workgroups

Installing a Network Adapter Driver

Installing NDIS3,
NDIS2, ODI
Drivers
42
This section contains the instructions for manually installing a network
adapter driver on a PC running Windows for Workgroups 3.11.
1. Power OFF the computer.
2. Install the network adapter card. Refer to the Network Adapter
Card Installation Guide - Book I and the documentation that came
with your computer.
3. Power ON the computer.
4. From the Network group under Program Manager, choose Network
Setup.
5. Select Networks.
6. Verify that Install Microsoft Windows Network is selected, then
select OK.
7. Select Sharing.
8. Select whether to allow file and/or printer sharing with other users.
9. Select Drivers.
10. Select Add Adapter.
11. Select Unlisted or Updated Network Adapter, then click OK.
12. Insert the CardAssistant CD into the CD drive or a Driver Installation
Disk into a floppy drive.
13. In the text box of the Install Driver dialog box, enter the drive letter
and path to the driver files and click OK.
If you are using the CD, the location of the appropriate driver will
differ depending on the type of adapter. Below are the driver
locations on the CardAssistant CD:
Adapter Card
AT-2400 Series
AT-2500/AT-2501 Series
AT-2450 Series, AT-2700
Series
Location
\drivers\at2400
\drivers\at2500
\drivers\at2701\wfw