Netware Ipxodi Support For Netware 4.X - Allied Telesis AT-2450 Series Installation Manual

Microsoft Windows for Workgroups
NetWare IPXODI
Support For
NetWare 4.x
46
c:\ net\lsl
c:\net\a2500 (atnic,a2400)
c:\net\ipxodi
c:\net\netx
14. Exit Windows and re-boot your PC by powering OFF then ON.
1. Verify that the ODI drivers for the AT-2500/AT-2501 Ethernet
Adapter Card are NOT loaded before setting up Windows for
Workgroups.
2. From the DOS command line, install the NetWare DOS/Windows
Client software. Select Yes to install Windows support and then
enter the path to your Windows directory, for example,
C:\WINDOWS
3. Start Windows.
4. Select Network Setup from the Network group.
5. select Networks.
6. Select Install Microsoft Windows Network, then select Other.
7. From the Other drop down list, select Novell NetWare
(Workstation Shell 4.0 and above) and click OK.
8. Select IPXODI.COM and LSL.COM (recommended), then OK.
9. In the Network Drivers dialog box, verify that ATI AT-xxxx
[ODI/NDIS2] and its default protocols, Microsoft NetBEUI and
IPX/SPX Compatible Transport with NetBIOS, appear in the
Network Drivers lis and then click OK.
10. From the Windows Setup dialog box, select Restart Computer.
Installing Novell NetWare 3.x and 4.x support adds
DEVICE=C:\WINDOWS\IFSHLP.SYS to your CONFIG.SYS file
and C:\WINDOWS\ODIHLP.EXE to your AUTOEXEC.BAT file.
Note
The sample AUTOEXEC.BAT shows VLM.EXE being used instead of
NETX.EXE. VLMs are required for NetWare 4.x but may be an
alternative to NETX with NetWare 2.x and 3.x.