Manual Installation - Allied Telesis AT-2450 Series Installation Manual

Novell Netware
Manual
Installation
56
Adapter Card
AT-2450/AT-2451 Series,
AT-2700/AT-2701 Series,
AT-2745/AT-2746 Series,
AT-2915 Series, AT-2930
Series
AT-2970, AT-2971 Series
1. For additional AT-2970 and AT-2971 parameter information, refer to the AT297x.txt
file.
If you are using a Driver Installation Disk, the adapter driver will be
located in the root directory.
5. Press <F3> to change the default path.
6. Press Return.
The adapter driver and other required files are copied to the SYS:
volume.
7. On the next menu, Protocols and Parameters, specify any
parameters where needed. A slot value is required when loading the
adapter driver. If the slot is unknown, driver will correctly detect slot
value when loading.
8. Select Save parameters and load driver.
9. Proceed with the installation as outlined in the Novell
documentation.
1. At the file server console prompt, issue the load statement(s) in this
order:
LOAD <DRIVE>:<PATH>\NBI
LOAD <DRIVE>:<PATH>\MSM
LOAD <DRIVE>:<PATH>\ETHERTSM
LOAD <DRIVE>:<PATH>\<DRIVER>
Where <DRIVE> and <PATH> are the drive and directory where you
copied the NLMs and the adapter driver file. <DRIVER> is the
filename of the driver.
Note
If MSM and ETHERTSM NLMs are not loaded, they will automatically
load before the driver. You will be prompted if you do not specify a
SLOT number.
Location
\drivers\at2701\netware\
\drivers\at29xx\netware\
drivers\at2971\netware\
1