Allied Telesis AT-2450 Series Installation Manual page 72

BootROM
72
PLCC Socket Installation
The PLCC socket has three square corners and one angled corner. The
angled corner of the ROM must be oriented to match the angled corner
of the socket.
Remove the MBA ROM from its anti-static packaging, and align the
angled corner of the MBA ROM with the angled corner of the ROM
socket on the adapter card. Press down gently and evenly on the ROM to
ensure that it is seated correctly in the socket. Figure 11 shows the MBA
ROM installation for the AT-BP2700 and AT-BP2501 PC Boot Agent.
Figure 11 MBA ROM Installation
Figure 12 shows an MBA ROM installation for the AT-BD2700 and
AT-BD2500 PC Boot Agent.
Figure 12 MBA ROM Installed on a AT-BD2700/AT-BD2500
Installing the NIC into the PC and Enabling the ROM Socket
Now that the ROM has been inserted into the adapter card, you can
install the card into your PC.
To install the adapter card into the PC, refer to the Network Adapter
Cards Installation Guide, Book II for instructions. The AT-2450 and
AT-2700 Series Adapter Cards will recognize the inserted MBA Boot ROM
automatically. However, PXE can be disabled or enabled through the
diagnostics program diag.exe.