Allied Telesis AT-2450 Series Installation Manual page 52

Novell Netware
52
Note
The default frame type for Novell file servers is now Ethernet_802.2.
If you require Ethernet_802.3, specify FRAME=ETHERNET_802.3 on
the command line when loading the driver.
To load multiple frame types for a single card, enter a LOAD and
BIND statement for each frame type. You need to supply a name on
each load line in order to avoid being prompted for which board to
bind IPX to. If you do not have the name option in the
AUTOEXEC.NCF, it will not execute completely without user
intervention.
Example:
LOAD <DRIVER> FRAME=ETHERNET_802.3 NAME=IEE8023
BIND IPX TO IEE8023 NET=11111
LOAD <DRIVER> FRAME=ETHERNET_802.2 NAME=IEE8022
BIND IPX TO LAN8022 NET=22222
Where <DRIVER> is the filename of the adapter driver.
Additionally, if you have a PCI-1 bus in your system, add
BUSTYPE=PCI1 to the command line, e.g., LOAD
C:\SERVER.4\<driver> BUSTYPE=PCI1. Otherwise the driver may not
find the card. If you don't know which bus you have, try loading
without the option. If it loads, you do not need it.
3. Add the load and bind statements you require to the server's
AUTOEXEC.NCF file so that the LAN driver will load automatically
each time the server starts up.
Here's an example of how the commands would look in your
AUTOEXEC.NCF file.
Example:
LOAD a2500v3 FRAME=Ethernet_802.3 (overrides default frame
BIND IPX to a2500v3 net=1 (all servers on the LAN segment need the
same #)
4. Proceed with the installation as outlined by Novell.