Netwareipxodi Support For Netware 3.X - Allied Telesis AT-2450 Series Installation Manual

NetWareIPXODI
Support for
NetWare 3.x
1. Create a new directory on your local hard drive (e.g.; C:\ATINET).
2. Copy the contents of the DOSODI directory on the CardAssistant CD
or the Driver Installation Disk to the directory you created.
If you are using the CardAssistant CD, the location of the
appropriate driver will differ depending on the type of adapter.
Below are the driver locations on the CardAssistant CD:
Adapter Card
AT-2400 Series
AT-2500/AT-2501 Series
AT-2450 Series, AT-2700
Series
If you are using a driver installation diskette, the driver location is
\Dosodi.
3. Verify that the ODI drivers for the AT-2500/AT-2501 Ethernet
Adapter Card are NOT loaded before setting up Windows for
Workgroups.
4. Start Windows.
5. Choose Network Setup from the Network group.
6. Select Networks.
7. Select Install Microsoft Windows Network, then Other.
8. Select Novell NetWare (Workstation Shell 3.X), then OK.
9. Select IPXODI.COM and LSL.COM (recommended), then OK.
10. Verify that ATI AT-xxxx[ODI/NDIS2] and its default protocols,
Microsoft NetBEUI and IPX/SPX Compatible Transport with
NetBIOS, appear in the Network Drivers list, then OK.
11. When asked if you want to modify the net.cfg file, you can enter the
path to the directory created earlier for your ODI files
(e.g.;C:\ATINET). After you make your changes, or if you do not want
to make changes, click OK.
12. From the Windows Setup dialog box, select Continue.
13. Edit the Autoexec.bat file by inserting the following file references
before C:\WINDOWS\odihlp.exe:
Network Adapter Card Installation Guide - Book II
Location
\drivers\at2400\Dosodi
\drivers\at2500\Dosodi
\drivers\at2701\Dosodi
45