Allied Telesis AT-2450 Series Installation Manual page 43

If you are using a Driver Installation Disk, the driver location is the
root (\) directory.
14. In the Network Adapters list of the Unlisted or Updated Network
Adapter dialog box, verify that Allied Telesyn PCI Ethernet
Adapter is highlighted, then click OK.
15. In the Network Drivers dialog box, verify that Allied Telesyn PCI
Ethernet Adapter and its default protocols, Microsoft NetBEUI and
IPX/SPX Compatible Transport with NetBIOS, appear in the Network
Drivers list, then click Close.
16. In the Network Setup dialog box, click OK.
17. If prompted, insert the required Windows for Workgroups
diskette(s) into your floppy drive and click OK.
Note
Windows for Workgroups occasionally loses its place at this point; if
you get a message from Windows that it cannot find a file, try
inserting Windows for Workgroups installation diskettes 7 and 8.
18. If prompted, reinsert the CardAssistant CD or Driver Installation Disk
into the appropriate drive.
19. In the text box of the Install Driver dialog box, click OK.
20. From the Windows Setup dialog box, select Restart Computer.
Network Adapter Card Installation Guide - Book II
43