Allied Telesis AT-2450 Series Installation Manual page 21

Hide thumbs Also See for AT-2450 Series:

Table of Contents

For the AT-2450, AT-2500, or AT-2700 Series adapters, to use the

adapter card's Wake-on-LAN feature in your computer using an

Advanced Configuration and Power Interface (ACPI), you must

connect the Wake-on-LAN cable to the Wake-on-LAN connector on

the adapter card and to the Wake-on-LAN connector on the

motherboard of the computer. For the location of the Wake-on-LAN

connector on the motherboard, refer to the documentation that

came with your computer.

The AT-2501, AT-2451F, AT-2701, AT-2915, AT-2930, AT-2970, and

AT-2971 do not require the optional external Wake-on-LAN cable.

These devices are PCI 2.2 compliant and can use the PCI 2.2 BUS for

Wake-on-LAN features.

Replace the PC's cover and secure it with the screws removed in

Step

Connect the adapter card to the network by connecting the

appropriate data cable.

10. Power ON the PC.

You are now ready to install the network adapter driver. Refer to the

appropriate chapter for your operating system.

Network Adapter Card Installation Guide - Book II

Table of Contents