Installing The Drivers - Allied Telesis AT-2450 Series Installation Manual

Installing the
1.
Drivers
2.
At the file server console prompt, issue the load statement(s) in this
order:
LOAD <DRIVE>:<PATH>\NBI
LOAD <DRIVE>:<PATH>\MSM
LOAD <DRIVE>:<PATH>\ETHERTSM
LOAD <DRIVE>:<PATH>\<DRIVER>
where <DRIVE> and <PATH> are the drive and directory where you
copied the NLMs and the adapter file. <DRIVER> is the filename of
the adapter driver.
Adapter Card
AT-2400 Series
AT-2500/AT-2501 Series
AT-2450/AT-2451 Series,
AT-2700/AT-2701 Series,
AT-2746 Series
AT-2915 Series, AT-2930
Series
AT-2970, AT-2971 Series
1. For additional AT-2970 and AT-2971 parameter information, refer to the AT297x.txt
file.
Note
If MSM and ETHERTSM NLMs aren't loaded, they'll automatically
load before the driver.
You will be prompted if you don't specify a SLOT number.
Next you must bind the LAN driver to IPX in order to attach to the
server. Type:
BIND IPX TO <DRIVER> NET=n
Where <DRIVER> is the filename of the adapter driver and n is the
node address Novell uses for routing IPX packets. This number is
arbitrary if there is the only one server on the network, but if there
are multiple servers on the same network, it must match the other
servers' external network number.
Network Adapter Card Installation Guide - Book II
Location
\drivers\at2400\netware\
\drivers\at2500\netware\
\drivers\at2701\netware\
\drivers\at29xx\netware\
\drivers\at2971\netware\
1
51