Sample Protocol.ini File - Allied Telesis AT-2450 Series Installation Manual

Microsoft Windows for Workgroups
Sample
PROTOCOL.INI
File
44
[network.setup]
version=0x3110
netcard=ms$a2500,1,MS$a2500,3
transport=ms$nwlinknb,NWLINK
transport=ms$ndishlp,MS$NDISHLP
transport=ms$netbeui,NETBEUI
lana0=ms$a2500,1,ms$netbeui
lana1=ms$a2500,1,ms$nwlinknb
lana2=ms$a2500,1,ms$ndishlp
[protman]
DriverName=PROTMAN$
PRIORITY=MS$NDISHLP
[NWLINK]
BINDINGS=MS$a2500
[MS$NDISHLP]
DriverName=ndishlp$
BINDINGS=MS$a2500
[NETBEUI]
DriverName=netbeui$
SESSIONS=10
NCBS=12
BINDINGS=MS$a2500
LANABASE=0
[MS$a2500]
DriverName=a2500$
[a2500]
Adapters=MS$a2500
Note
These are the default values for installation. If you are adding any
TCP/IP software, this configuration will satisfy the NDIS 2.0
requirements of TCP/IP systems.