Squeegee; Removing The Squeegee Assembly - Tennant 5680 Operator's Manual

Hide thumbs Also See for 5680:

Table of Contents

MAINTENANCE

SQUEEGEE

The squeegee assembly channels water into the

vacuum fan suction. The front blade channels the

water, and the rear blade wipes the floor.

Check the squeegee blades for damage and wear

daily. Rotate or replace either of the squeegee

blades if the leading edge is torn or worn half-way

through the thickness of the blade.

The squeegee can be adjusted for leveling and

deflection. The deflection and leveling of the

squeegee blades should be checked daily, or

when scrubbing a different type of floor.

The squeegee assembly can be removed from the

squeegee pivot to prevent damage during

transport of the machine, or when changing to a

different squeegee width. The squeegees are

available in three widths to be used with the three

different model scrub heads; model 700 (700 mm),

model 800 (800 mm), and model 900 (900 mm).

1. Raise the squeegee.

2. Turn the machine power off.

FOR SAFETY: Before leaving or

servicing machine, stop on level

surface, set parking brake, and turn off

machine.

3. Remove the squeegee suction hose from the

squeegee.

Home

Find... Go To..

5680 330459 (9- -06)

Table of Contents