Double Scrubbing - Tennant 5680 Operator's Manual

DOUBLE SCRUBBING

Double scrubbing is a method for removing heavy
floor accumulations. This is done by making two
passes over the area to be cleaned with the
machine.
Double scrubbing can be performed using the
FaST SCRUBBING SYSTEM (option),
ec- -H2O SCRUBBING SYSTEM (option) or
CONVENTIONAL SCRUBBING methods.
1. First, make a pass over the area scrubbing
with the squeegee up. This dispenses the
solution/foam over the area allowing the
solution/foam to soak on the floor.
NOTE: When using the FaST or ec- -H2O system
(option), the solution flow lever is nonfunctional.
The FaST and ec- -H2O system flow rates are
pre- -set. The ec- -H2O module has optional flow
rate settings. If solution flow adjustments are
required, contact an Authorized Service Center.
FOR SAFETY: When using machine, go
slow on inclines and slippery surfaces.
2. Lower the squeegee to the floor with the
squeegee lever.
3. Then make a second pass scrubbing with
the squeegee down.
5680 330459 (10- -08)
Home Find... Go To..
OPERATION
29