Tennant 5680 Operator's Manual page 72

MAINTENANCE
4. Unplug the drive motor from the electrical
harness before attempting to winch the
machine. The machine will become easier to
maneuver when it is unplugged.
5. Position the machine onto the truck or trailer
as far as possible. If the machine starts to
veer off the centerline of the truck or trailer,
stop and straighten the machine.
6. Lower the scrub head with the brushes or
pad drivers installed, lower the squeegee
when transporting the machine. Block the
machine tires and tie down the machine to
the truck or trailer before transporting.
NOTE: Do not use the steering handles to
secure the machine for transport.
Secure a strap over the top of the machine
to prevent the machine from tipping.
The rear tie-down locations are on either
side of the machine frame by the rear
casters.
7. If the loading surface is not horizontal or is
higher than 380 mm from the ground, use a
winch to unload machine.
If the loading surface is horizontal AND is
380 mm or less from the ground, the
machine may be pushed off the truck or
trailer.
FOR SAFETY: When unloading machine
off truck or trailer, use winch. Do not
push the machine off the truck or trailer
unless the loading surface is horizontal
AND 380 mm or less from the ground.
70
Home Find... Go To..
5680 330459 (9- -02)