Squeegee Blades; Replacing Or Rotating The Rear Squeegee Blade - Tennant 5680 Operator's Manual

Hide thumbs Also See for 5680:
Table of Contents

Advertisement

SQUEEGEE BLADES

The squeegee has two squeegee blades, the front
and back. Each blade has four wiping edges. To
use them all, start with one wiping edge. To use
the next wiping edge, rotate the blade end-for-end.
To use the next wiping edge, rotate the top edges
down, bottom edges up. To use the last edge,
rotate the blade end-for-end.
Replace any worn or damaged squeegee blades.
REPLACING OR ROTATING THE REAR
SQUEEGEE BLADE
1. Make sure the squeegee is raised off the
floor.
2. Turn the machine power off.
FOR SAFETY: Before leaving or
servicing machine, stop on level
surface, set parking brake, and turn off
machine.
3. Loosen the two retention knobs, one at each
end on the squeegee.
5680 330459 (9- -02)
Home
Find... Go To..
MAINTENANCE
65

Advertisement

Table of Contents
loading

Table of Contents