Post-Operation Checklist - Tennant 5680 Operator's Manual

OPERATION

POST-OPERATION CHECKLIST

Check over this list of items after you have
finished scrubbing with the machine powered on:
- Check the battery charge level.
NOTE: The reading on the battery discharge
indicator may not be accurate when the machine
is first powered on. Operate the machine a few
minutes before reading the charge level of the
batteries.
Check over this list of items with the machine
powered off:
- Check for wire, string, or twine wrapped
around the scrub brushes.
- Check the squeegees for wear or damage.
- Check the squeegee suction hose for
obstructions.
- Drain and clean the recovery tank.
- Clean the vacuum fan inlet filter.
- Check under the machine for leaks.
- Check the service records to determine
maintenance requirements.
- FaST scrubbing: If FaST PAK is empty after
scrubbing, install the new FaST PAK or
connect the supply hose to the storage plug.
36
Home Find... Go To..
5680 330459 (11- -05)