Ec- H2O Switch (Option); Power Kill Switch - Tennant 5680 Operator's Manual

Hide thumbs Also See for 5680:

Table of Contents

OPERATION

ec- H2O SWITCH (OPTION)

The ec- -H2O switch (option) enables the ec- -H2O

(electrically converted water) system. When the

ec- -H2O system is enabled, it is turned on and off

with the scrub switch.

Enable the ec- -H2O system: Press the top of the

ec- -H2O switch.

Enable conventional scrubbing: Press the bottom

of the ec- -H2O switch.

NOTE: Disable the ec- -H2O system before using

the machine for conventional scrubbing.

NOTE: The ec- -H2O system will not start until the

machine starts scrubbing.

NOTE: Do not enable the ec- -H2O system with

conventional cleaning detergents in the solution

tank. Drain, raise and refill the solution tank with

clear cool water only before operating the ec- -H2O

system. Conventional cleaning detergents/

restorers may cause failure to the ec- -H2O

solution system.

The power kill switch halts all power to the

machine.

Halt: Hit the power kill switch.

Restart: Turn the power kill switch to the right to

release the switch. Turn off the machine power,

then turn on the machine power.

5680 330459 (10- -08)

Home

Find... Go To..

Table of Contents