DRAINING AND CLEANING THE TANKS
When you are finished scrubbing, or when the
vacuum fan shuts off, signalling a full recovery
tank, the recovery tank should be drained and
cleaned. The solution tank then can be filled again
for additional scrubbing.
1. Stop scrubbing.
2. Drive the machine next to a floor drain or
sink.
3. Turn the machine power off.
FOR SAFETY: Before leaving or
servicing machine, stop on level
surface, set parking brake, turn off
machine, and remove key.
4.
Set the machine parking brake.
5680 330459 (9- -02)
Home
Find... Go To..
OPERATION
31