Installing The Squeegee Assembly; Leveling The Squeegee - Tennant 5680 Operator's Manual

4. Loosen the two mounting knobs.
5. Pull the squeegee off the machine.

INSTALLING THE SQUEEGEE ASSEMBLY

1. Make sure the squeegee is raised.
2. Place the squeegee under the squeegee
pivot.
3. Slide the squeegee frame onto the squeegee
pivot.
4. Tighten the mounting knobs.
5. Push the squeegee suction hose on the
squeegee.

LEVELING THE SQUEEGEE

Leveling of the squeegee assures even contact
the length of the squeegee blade with the surface
being scrubbed. Make sure this adjustment is
done on an even, level floor.
1. Turn the machine power on.
2. Lower the squeegee.
3. Drive the machine forward, then turn the
machine power off.
4. Look at the deflection of the squeegee blade,
over the full length of the squeegee blade.
5680 330459 (9- -06)
Home Find... Go To..
MAINTENANCE
63