10.Replace the center disk to secure the pad in
place on the driver.
11. Place the new scrub brush/pad driver on the
floor in front of the scrub head. Push the
brush under the scrub head.
12. Line up the drive socket with the drive plug.
13. Lift the scrub brush/pad driver assembly into
the drive plug.
14. Check to make sure the brush/pad driver
assembly is securely mounted on the brush
drive hub.
15. Close the scrub head access cover.
16. Repeat for the other brush/pad driver.
5680 330459 (6- -00)
Home
Find... Go To..
MAINTENANCE
53