Belts And Chains; Brush Drive Belt; Static Drag Chain; Tires - Tennant 5680 Operator's Manual

Hide thumbs Also See for 5680:

Table of Contents

MAINTENANCE

BELTS AND CHAINS

The two brush drive belts are located on the

cylindrical brush scrub head. The belts drive the

cylindrical brushes. Proper new belt tension is a 3

mm (0.1 in) deflection from a force of 1.37 to 1.48

kg (3.0 to 3.26 lb) at the belt midpoint.

When reusing an old belt, measure and record the

belt tension before removal, so that the belt can

be reinstalled at the same tension.

If the old belt tension was not recorded, the

recommended force per old belts is

1.03 to 1.14 kg (2.28 to 2.52 lb) with a deflection

of 3 mm (0.1 in).

Check the belt tension and wear every 100 hours

of operation.

A static drag chain prevents the buildup of static

electricity in the machine. The chain is attached to

the transaxle.

Make sure the chain is always touching the floor.

The standard front tires are foam filled.

The front wheel lug nuts should be tightened to

102 to 115 Nm.

5680 330459 (11- -05)

Home

Find... Go To..

Table of Contents