Scrub Switch; Scrub Head Strap (Disc Head); Squeegee Lever - Tennant 5680 Operator's Manual

OPERATION

SCRUB SWITCH

The scrub switch controls the scrubbing
operations.
Lower brushes and start scrubbing: Press the top
of the switch.
Raise brushes and stop scrubbing: Press the
bottom of the switch.
NOTE: The scrub brushes do not start until the
steering handles are rotated forward or backward.
NOTE: The scrub switch also controls the
FaST/ec-H2O system (option) when the
FaST/ec-H2O system is enabled with the
FaST/ec-H2O switch.

SCRUB HEAD STRAP (DISC HEAD)

The scrub head strap increases the scrub head
pressure and puts the scrub head into heavy
scrub mode.
The heavy scrub mode is used when deep
scrubbing or floor stripping is necessary.
Start heavy scrub mode: With the scrub head in
the up position, pull out on the scrub head strap
until the scrub head drops into place. Lower the
brushes and start scrubbing.
Stop heavy scrub mode: Press the bottom of the
scrub switch. The scrub head will reset when it
raises and stops scrubbing. When it is started
again, the scrub head will operate at daily
scrubbing pressure.

SQUEEGEE LEVER

The squeegee lever controls the squeegee and
the vacuum system.
Lower squeegee and start vacuum: Move the
squeegee lever up and to the left to unlock it, and
then release the lever.
Raise squeegee and stop vacuum: Pull the lever
up and move it to the right to lock the lever in the
up position.
NOTE: Raise the squeegee before reversing the
machine.
11
5680 330459 (10- -08)
Home Find... Go To..