Installing Fast Pak Agent (Option) - Tennant 5680 Operator's Manual

Hide thumbs Also See for 5680:

Table of Contents

INSTALLING FaST PAK AGENT (OPTION)

NOTE: Machine must be equipped with the FaST

option before the FaST PAK agent can be

installed.

1. Remove the perforated knock--outs from the

FaST PAK Floor Cleaning Concentrate

carton. Do not remove the bag from the

carton. Pull out the bag's hose connector on

the bottom of the bag and remove the hose

cap from the connector.

NOTE: The FaST PAK Floor Cleaning

Concentrate is specifically designed for use

with the FaST system scrubbing application.

NEVER use a substitute, machine damage will

result.

FOR SAFETY: When using machine,

always follow the handling instructions

on chemical container.

2. Empty the solution tank. See the DRAINING

AND CLEANING THE TANKS section of the

manual.

NOTE: When scrubbing with the FaST system

option, use clean water only. Do not add cleaning

agents in the solution tank. Conventional cleaning

agents/restorers may cause failure to the FaST

solution system..

3. .Raise the solution tank and remove the front

cover to access the FaST PAK carton.

5680 330459 (11- -05)

Home

Find... Go To..

OPERATION

Table of Contents