Tennant 5680 Operator's Manual page 24

OPERATION
4. Place the FaST PAK carton in the carton
holder under the front cover of the machine.
Connect the supply hose to the FaST PAK
bag.
NOTE: If any dried concentrate is visible on the
supply hose connector or the on the FaST PAK
connector, soak and clean with warm water.
5. Make sure to connect the supply hose onto
the hose storing plug when the supply hose
is not connected to the FaST PAK. This will
prevent the FaST solution system from
drying out and clogging up the hose.
6. When replacing an empty FaST PAK carton,
allow the new FaST PAK detergent to gravity
feed into the system for several minutes
prior to operating the FaST system. If the
detergent does not flow out of the FaST
PAK, simply squeeze and release the hose
several times. If the previous FaST PAK was
run dry, it may take up to 3 minutes of
operation to remove any air pockets in the
system before you achieve maximum
foaming.
22
Home Find... Go To..
5680 330459 (10- -08)