Solution Tank - Tennant 5680 Operator's Manual

MAINTENANCE
Rinse and wipe off the sensors daily on machines
with float sensors installed inside the recovery
tank.
A vacuum fan filter is located in the recovery tank.
Remove and clean this filter daily. Clean by
shaking dust or rinsing pleats with low pressure
water.
NOTE: Be sure the vacuum filter is dry before
reinstalling it in the machine.
An optional debris screen is available for the
recovery tank entry. If your machine is equipped
with this screen, remove and clean it daily.

SOLUTION TANK

The solution tank stores the cleaning solution.
The solution tank does not require regular
maintenance. If deposits form on the bottom of the
tank, rinse the tank with a strong blast of warm
water. The tank can be flushed through the fill
opening and top access hole.
The solution tank contains one standard solution
line filter. If the filter becomes dirty, the solution
flow will be reduced. Check and clean these filters
if necessary.
NOTE: DO NOT use steam to clean the tank.
Excessive heat can damage the tanks and
components.
58
Home Find... Go To..
5680 330459 (3- -08)