Tennant 5680 Operator's Manual page 35

9. Flush out the inside of the recovery tank with
clean water.
NOTE: DO NOT use steam to clean the tank.
Excessive heat can damage the tanks and
components.
10. Rinse off the float sensor on the side of the
recovery tank.
11. Remove and clean the vacuum fan filter
located in the recovery tank. Clean by
shaking dust or rinsing pleats with low
pressure water. Insert the filter back in to the
recovery tank when finished.
NOTE: Be sure the vacuum filter is dry before
reinstalling it in the machine.
5680 330459 (3- -08)
Home Find... Go To..
OPERATION
33