Piper Arrow PA-28R-201 Pilot Operating Handbook page 291

7
SUPPLEMENT
4- NORMAL
SECTION
Familiarity with the enroute operation of the
GNS
approach operations. Do
operations in IMC
in the use of the ONS
A. DETAILED OPERATING
operating procedures are described in the GAR.MIN
Normal
Pilot's Guide, p/n 190-00140-00, Rev. A, dated October 1998, or later
appropriate revision.
B. PLOT'S DISPLAY
430 System data will appear on the Pilot's HSL
The GNS
data iseitherGPS or VLOC
key.
C. AUTOPILOT/FLIGHT
of the GNS
Coupling
autopilot/flight director can
autopilot/flight director in the NAV
When the autopilot/flight director system is using course information
by the GNS
supplied
automatically driven to the desired track, the course pointer on the HSI
must be manually set to the desired track (DTK)
430. For detailed autopilot/flight director operational instructions, r efer to
the FAA
Approved
director.
REPORT: VB-1612
9-44 6 of S
HB-PQY, Page: 9-44-(0)
PROCEDURES
WARNING
430 does not constitute proficiency in
not attempt approach
prior to attainingproficiency
430 approach feature.
PROCEDURES
as annunciated on the display above the CDI
OPERATION
DIRECTOR
430
System
be accomplished
or APR
430
System
Flight Manual
Supplement
REVISED:
Revision: 5, SEPTEMBER 14, 2000
PA-28R-201,
The source of
steering, information
by engaging
mode.
and the course pointer
indicated by the GNS
for the autopilot/flight
ISSUED:
JULY
SEPTEMBER
ARROW
GNS 430
to the
the
is not
12, 1995
14,2000
9-44