Piper Arrow PA-28R-201 Pilot Operating Handbook page 418

PA-28R-201, ARROW
SECTION 4- NORMAL
To Operate as an Automatic
1. OFF/VOL
Control
2. Frequency Selector Knobs
frequency display.
3. FRQ
Button
the active position.
4. ADF
SPEAKER/PHONE
SELECT as desired.
5. OFF/VOL
Control
6. ADF
Button
ADF Test (Pre-flight or In-flight):
1. ADF
Button
position.
2. ADF Button
hesitation to the station bearing. Excessive pointersluggishness,wavering
or reversalsindicatea signal thatistoo weak or a system malfuction.
ISSUED:
JULY
12,
REVISED:
JANUARY
HB-PQY, Page: 9-161-(0)
PROCEDURES
Direction Finder:
ON.
SELECT
PRESS to move the desired frequency from the standby to
Selector Switch (on audio control panel)
SET to desired volume level.
SELECT ADF mode
ANT
SELECT mode
SELECT ADF mode
J995
21, 2009
Revision: 19, JANUARY 21, 2009
SUPPLEMENT
desired frequency in the standby
and note relative bearing on indicator.
and note pointer moves
and note the pointer moves without
REPORT:
Page 3 of 10
SECTION 9
19
to
900
VB-1612
•
9-161
9-161