Replacing The Oven Light Bulb - Siemens HB84E562B Instruction Manual

Problem
A signal sounds. The two dots in
the display are flashing.
Error message "Er1" or "Er4"
appears in the display.
Error message "Er11" appears in
the display. "Button is jammed"
Error message "Er19" appears in
the display.
Error message "Er17", "Er18" or
"Er20" appears in the text display.
Replacing the oven
light bulb
38
Possible cause
The appliance is in
demonstration mode.
The temperature sensor has
failed.
The buttons are dirty or the
mechanics have jammed.
There is extreme overheating
(possibly a fire inside).
Microwave power setting too
high.
Technical fault.
d
Risk of electric shock.
Incorrect repairs are dangerous. Repairs may only be
carried out by one of our trained after sales engineers.
The oven light bulb is replaceable. Heat resistant 25
V, 240 W halogen bulbs can be obtained from the
after sales service or a specialist retailer.
Always remove the new halogen bulb from the
packaging using a dry cloth. This increases the
service life of the bulb.
1. Unplug the appliance from the mains or switch off
the circuit breaker in the fuse box.
2. Open the appliance door.
Undo the two screws from the right and left of the
oven.
3. Place a tea towel in the cold oven to prevent
damage.
Carefully lift out the appliance.
Remedial action/notes
1. Press the 2 button.
2. Press and hold the h button
for 3 seconds.
The demonstration mode is
deactivated.
Call the after sales service.
Press all buttons several times,
and if this does not help,
contact the after sales service.
Do not open the door.
Disconnect from the mains or
switch off the fuse in the fuse
box and allow to cool down.
Call the after sales service.