Series Of Operations - Siemens HB84E562B Instruction Manual

1,2,3 series of operations

Ovenware
Setting sequential
operations
The cooking time has
elapsed
Changing the setting
Opening the oven door
during operation
22
You can use the series of operations function to set
up to three different microwave power settings and
times and then start.
Always use heat resistant cookware which is suitable
for microwaves.
1. Set the function selector to ß.
2. Press the 2 button.
The ª for the first sequential operation appears in
the display.
3. Set the first microwave power level and cooking
time.
4. Press the 2 button.
The « for the second sequential operation
appears.
5. Set the second microwave power level and
cooking time.
6. Press the 2 button.
The ¬ for the third sequential operation appears.
7. Set the third microwave power level and cooking
time.
8. Press the † button.
The operation begins. The total cooking time appears.
A signal sounds. The sequential operation has
finished. You can cancel the acoustic signal before it
sounds using the 0 button.
It is only possible to make a change before the start.
Press the 2 button repeatedly until the number for
the sequential operation appears. Change the setting.
Operation is suspended. After closing the door,
press † again. The programme will then continue.