Table of Contents
Advertisement
Note
1
Select [Mixed Sized Originals].
2
Select [On].
Off
Select this item when all documents are of the same size.
On
When scanning documents of different sizes, the machine automatically detects the
size of each document.
Original Orientation
In order to identify the top of the document, the orientation of the set document must
be configured.
Note
Upright Images
Select this item when placing the top of the document facing the inner side of the
document glass or document feeder.
Sideway Images
Select this item when placing the top of the document facing the left side of the
document glass or document feeder. Be sure to select [Sideway Images] when the
top of the document is placed facing the left side (horizontal text).
Edge Erase (Erasing Edges and Margin Shadows in the Document)
When you scan a document while the document cover is open or when you scan a
booklet, black shadows sometimes appear along the edges or center margin of the
output scanned image. This feature allows you to erase such shadows.
Note
• Always load the A5-size documents in portrait orientation.
• When loading B5 documents together with A3 documents loaded in landscape orientation or
A4 documents loaded in portrait orientation, load B5 documents in portrait orientation.
• The recommended document size combinations are A4 portrait and A3 landscape, or B5
portrait and B4 landscape. If the combination of the document sizes is not our
recommendation, the documents can be fed at an angle may not be copied properly.
• When [Reduce/Enlarge] is set to [Auto %] and the output size is specified for [Output Size],
the scanned data is automatically reduced/enlarged to the specified size. However, since
the scanned image is not rotated, the image will be reduced/enlarged to fit the specified size
while keeping its orientation. For example, when an A3 landscape original is loaded and the
output size is set to A4 portrait, the scanned image is reduced to A5 landscape and printed
on A4 portrait paper.
• If the document size cannot be detected automatically, a screen to input the document size
appears.
• If the [Original Orientation] differs from the actual document orientation, then the machine
may mistakenly detect the head of the document.
• For 2-sided originals, the same edge erase amounts are set for the front and back sides.
• If you set [Reduce/Enlarge], the edge erase amounts will be reduced or enlarged in
proportion to the ratio you configured.
Layout Adjustment
4
151
Advertisement
Table of Contents
