Fuji Xerox ApeosPort-II 7000 User Manual page 106

3 Copy
Booklet Creation
For information on the feature, refer to "Booklet Creation (Creating a Booklet)" (P.79).
Covers
For information on the feature, refer to "Covers (Attaching a Cover to Copies)" (P.82).
Important • The machine does not copy on a cover when using the Build Job feature.
Annotation
For information on the feature, refer to "Annotation (Adding Stamp/Date/Page Number to Copies)"
(P.87).
Separators
For information on the feature, refer to "[Build Job - Separators] Screen" (P.105).
Watermark
For information about the feature, refer to "Watermark (Printing Control Number on the Background)"
(P.93).
3
Secure Watermark
For information about the feature, refer to "Preset Repeat Image (Making Multiple Copies on a Single
Sheet)" (P.99).
Output Orientation
For information about the feature, refer to "Output Orientation (Specifying Face Up or Down)" (P.98).
[Copy Job] screen
The following describes the screen that appears while the Build Job is being executed.
Change Settings...
The Copy screen appears and you can change the settings for the loaded document.
After setting the features, press the <Start> button on the control panel to start
scanning of the document.
When using a stored program for Build Job:
While the machine makes copies using the Build Job feature, you can interrupt the job
to use the stored program.
1)Select [Change Settings...].
2)Select the [Job Assembly] tab.
3)Select [Stored Programming].
4)Select the registered stored program number, which contains the features you wish
to use.
Note
For information on how to register a stored program, refer to "Registering Stored Program for Build
Job" (P.177).
104
• You can only select numbers that have been registered.