Table of Contents
Advertisement
Operations during Faxing
The following describes the available operations during faxing. The following shows the
reference section for each feature.
Stopping the Fax Job ................................................................................................................ 217
Changing the Scan Settings...................................................................................................... 218
Stopping the Fax Job
To cancel scanning a fax document, follow the procedure below.
1
Press either [Stop] on the touch
screen or the <Stop> button on the
control panel
2
Select [Cancel].
Note
If the screen shown in step 2 does not appear even after you press the <Stop>
button on the control panel:
Depending on the jobs in progress, screens for canceling jobs may not appear. In that
case, use the following procedure to cancel a fax job on a job status screen.
• If two or more jobs are in
progress, a confirmation
screen appears for each job.
Select [Start] or [Cancel]
depending on whether you
want to start or cancel the job.
Operations during Faxing
1
2
3
4
5
6
7
8
9
0
#
C
<Stop> button
10
217
Advertisement
Table of Contents
