Table of Contents
Advertisement
3 Copy
Operations during Copying
This section describes available operations during copying. The following shows the
reference section for each feature.
Stopping the Copy Job
To cancel the copy job in progress, follow the procedure below.
1
Press either [Stop] on the touch
screen or the <Stop> button on the
control panel.
3
2
Select [Cancel].
If the screen shown in step 2 does not appear even after you press the <Stop>
button on the control panel:
Depending on the jobs in progress, screens for canceling jobs may not appear. In that
case, use the following procedure to cancel a copy job on a job status screen.
54
Stopping the Copy Job ................................................................................................................54
Changing the Number of Copies.................................................................................................55
Interrupting the Copy Job ...........................................................................................................56
1
2
3
4
5
6
7
8
9
0
#
C
<Stop> button
Advertisement
Table of Contents
