Fuji Xerox ApeosPort-II 7000 User Manual page 29

C-Finisher, C-Finisher with Booklet Maker
No. Component
1 Punch scrap container
2 Output tray
3 Exit cover
4 Finisher tray
5 Staple cartridge
*1
6 Booklet tray
7 Front cover
*1
8 Booklet unit
9 Booklet staple cartridge
*1 Only available when C-Finisher with Booklet Maker is installed.
Note • The C-Finisher and the C-Finisher with Booklet Maker are optional. In this manual, the C-
9
8
Collects the scraps from the puncher. Draw out the box when throwing
the dust away.
Receives documents.
Open this cover to access the insides of the machine to clear paper
jams.
Stapled or punched documents are delivered.
Contains staples. Pull out the cartridge to clear staple jams, or replace
staples.
Documents are delivered here when Folding is selected in the booklet
creation function.
Open this cover to access the insides of the machine to clear paper or
staple jams, replace staples, or throw punch dust away.
This unit is for folding documents in half and stapling the folded
documents.
Two staple cartridge for booklet creation (gutter) are installed. Remove
this cartridge to replace staples or clear staple jams.
Finisher or the C-Finisher with Booklet Maker is abbreviated as "finisher".
Machine Components
2
1
3
4
5
6
7
Function
2
27