Table of Contents
Advertisement
3 Copy
Important • Confirm that the orientation of the document and the [Original Orientation] setting of the
Note
1
Select [Booklet Creation].
2
Select any item.
Off
Booklet Creation is not applied to copies.
3
On Create Booklet
Copies are made to enable left binding or top binding.
On - Right Bind Create Booklet
Copies are made to enable right binding.
On - Do not Create Booklet
You can output the copies of scanned documents as they are by specifying Bi-fold/
Stapling. Select this when you do not need a document to be copied in page order.
Note
Covers
You can attach a cover to a booklet.
No Covers
No cover is added.
Blank Covers
A blank sheet of paper is attached as the cover.
Front Covers - 2 Sided
The first and second pages of the document are copied on both sides of the cover.
Front & Back Cover - Print Outside
The first page of the document is copied on the front side of the cover.
Last Page on Back Cover
The last page of the original is used as the back cover of the booklet. Select the check
box to use the last page as the back cover. When using [Subsets] to separate booklets,
the cover will be made on the last page of the last subset.
Note
80
[Layout Adjustment] screen are the same.
• If the number of pages in the booklet is not a multiple of four, the remaining pages will be
output as blank pages.
• If [Auto] is set for [Paper Supply], a tray specified in [Auto Paper Off] is automatically
selected. Change the settings if necessary. For information on [Auto Paper Off], refer to "6
System Settings" > "Copy Mode Settings" > "Copy Control" in the Administrator Guide.
• This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
• Depending on the number of pages in the original, a blank sheet may be inserted before the
last page.
Advertisement
Table of Contents
