Table of Contents
Advertisement
2 Product Overview
Power On / Off
Turn on the power before operating the machine.
The machine is ready for copy and print operation within 30 seconds after the power is
turned on. The time may vary depending on the machine configuration.
Turn the machine off at the end of the day or when it is not in use for a long period of
time. If you want to reduce power consumption, use the power saving feature.
Important • Switching off the power of the machine may cause loss of data being processed.
For information on the power saving feature, refer to "Power Saver Mode" (P.32).
Powering On
The procedure for turning on the power is as follows.
1
2
Open the cover and press the
power switch to the [ | ] position to
turn the power on.
Note
Powering Off
The procedure for turning the power off is as follows.
Important • Switching off the power of the machine may cause loss of data being processed.
1
Before turning the power off, make sure that all copy or print jobs have completely
finished. Also, make sure that the <Online> indicator is not lit.
Important • Never turn the power off in the following instances:
2
Press the power switch to the [ ] position.
Important • Power off processing is performed internally on the machine for a certain period of time after
Note
30
• The "Please wait..." message
indicates that the machine is
warming up. The machine
cannot be used during
warming up.
• While warming up, the
machine is not ready to copy
documents even if it displays
the initial screen on the control
panel.
- While data is being received
- While jobs are being printed
- While jobs are being copied
- While jobs are being scanned
the power switch is turned off. Therefore, do not unplug the power cord from the power outlet
immediately after turning the power switch off.
• Before you turn the power back on after turning it off, first make sure that the touch screen
has gone out.
Advertisement
Table of Contents
