Table of Contents
Advertisement
Fax Procedure
This section describes the basic server fax operations. The following shows the fax flow
and reference sections.
Step 1 Loading Documents ...................................................................................................... 211
Step 2 Selecting Features ......................................................................................................... 213
Step 3 Specifying the Destination ............................................................................................ 214
Step 4 Starting the Fax Job....................................................................................................... 214
Step 5 Confirming the Fax Job in the Job Status ..................................................................... 215
Step 1 Loading Documents
There are two methods for loading documents:
Document Feeder
Single sheet
Multiple sheets
Document Glass
Single sheet
Bound documents, such as books
Document Feeder
The document feeder supports single and multiple sheet documents with sizes from
139.7 x 210 mm (A5, 5.5 x 8.5 inches) to 297 x 432 mm (A3, 11 x 17 inches).
The document feeder automatically detects standard size documents. For non-
standard size documents, input the size in the [Original Size] screen.
For information on entering document sizes, refer to "Original Size (Specifying the Scan Size for the
Original)" (P.224).
Note
The document feeder accepts the following number of sheets.
Document Type (Weight)
Lightweight paper (38 - 49 g/m
Plain paper (50 - 80 g/m
Heavyweight paper (81 - 128 g/m
Heavyweight paper (129 - 200 g/m
For information on faxing mixed sized documents, refer to "Mixed Sized Originals (Scanning Different
Size Documents Simultaneously)" (P.225).
Important • Place folded or creased documents on the document glass to avoid paper jams.
• The standard document sizes that can be detected automatically depend on the [Paper Size
Settings] in the System Administration mode. For information on the paper size settings,
refer to "6 System Settings" > "Common Settings" > "Other Settings" > "Paper Size Settings"
in the Administrator Guide.
2
)
2
)
2
)
2
• 2-sided scanning of lightweight paper (38 - 48 g/m
Number of
Sheets
250 sheets
250 sheets
150 sheets
)
100 sheets
2
) is not supported.
Fax Procedure
10
211
Advertisement
Table of Contents
