Timer; Up Timer/Down Timer/Hour Selection; Start/Swtop Switch Setting; Hour Mode - FUTABA T18MZ WC Instruction Manual

The Timer function may be set for any desired time,
i.e. engine run time, speci ed times for competitions,
etc. Two independent timers are provided for your
use. The timers are stored independently with each
model, meaning that when you switch between
model setups, the timer associated with the new
model is brought up automatically.
The timers may be set to start and stop from the
motion of any switch or stick. You may set the ON
and OFF directions freely. Each timer has a capacity
of up to 59 minutes 59 seconds.

Up timer/Down timer/Hour selection

Start/SWtop switch setting

Lap time switch selection
92
＜ Linkage Menu ＞
Each timer may be set for count-down or count up
operation with your choice of a target time. Also
split time may be set up and counted.
If a target time is set and the timer reaches this point,
a buzzer will sound for each count generated.
Countdown timers sound one short beep during the
last twenty seconds and two short beeps during the
last ten seconds before reaching the target, then a
long tone at the target time, and continue counting
with displaying a minus (-) sign. Count-up timers
also beep the last twenty and ten seconds, beep the
target time, and keep counting upwards until shut
down.
<Lap time list>
Timer operation

Hour mode