Touch Panel/ Rotary Key/ Direct Key; Touch Panel (And Rotary Key) Lock; Automatic Lock - FUTABA T18MZ WC Instruction Manual

Note: The trim positions you have set will be stored in the
non-volatile memory and will remain there.

Touch Panel/ Rotary Key/ Direct Key

Touch panel, rotary keys and direct keys are used for
entering data.
Touch Panel
Touch the panel with your finger or the attached
stylus pen, which is also used as a toolbox, to enter
data.
CAUTION
Touch softly the Touch Panel with the stylus pen
or your ngertips.
*Plastic lm is attached to the touch panel. Please be careful so
that you don't scratch the touch panel with anything hard such
as a metal object. Don't push the touch panel with excessive
force or drop anything on the panel.
*Although you may find some air bubbles under the plastic
panel due to environmental changes such as temperature, it is
not a defect and will cause no problems.
* Color LED is made from many pixels. Some pixels hold
lighting. Moreover, some pixels go out. And a screen may
icker. Such condition is the characteristics of color LED. It is
not failure.
or
Rotary key
In addition to touch panel, you can select items by
rotating the rotary keys to the left or to the right.
*There is a function which cannot be accessed by the Rotary
Key.
Direct key
You can directly call your favorite functions or menu
screens.
(The default setting at the factory)
S1: System menu
S2: Linkage menu
S3: Model menu
S4: Return
[How to change assignment of the direct key
1. Open the screen you want to call. Then push
S1 and S4 keys simultaneously. (You will see the
direct key setting screen.)
2. Select the direct key.
3. Press the [Enter] key.
4. Press the [Yes] key.

Touch Panel (and Rotary Key) lock

Please perform a touch-panel lock for safety. Touch
screen in [System Menu → [Display other than the
following has an automatic setup.
Start-up lock: It becomes a panel lock at the time of
the power supply ON.
Automatic lock: It synchronizes with Backlight
decrease time and becomes a panel lock.
(S2-S3)
touch panel locked
S2 S3
Locking the LCD touch screen.
DANGER
The T18MZ-WC's touch screen is very sensitive.
To avoid accidentally activating it during a
flight, it is suggested that it be locked. Due to
the touch screen's sensitivity, allowing it to be
touched during ight by a neck strap hook, servo
extension, or even your hand could be dangerous.
Please use the touch panel lock for added safety
during ight.
(S2-S3)
touch panel unlocked
S2 S3
＜ Before Use ＞
17