Condition Hold - FUTABA T18MZ WC Instruction Manual

This function may be used to limit the maximum
speed of the engine so that you may adjust flight
conditions when the engine is running. An alarm
indicates that the function is operating. It will
prevent the engine from racing dangerously when
adjusting the Idle-Up settings.
While this function is active, the throttle servo
position is xed at the point that you have indicated
when the function is activated. You must deactivate
this function when you are through making
adjustments.
The system will not allow you to activate/deactivate
this function in either of the following states:
114
＜ Linkage Menu ＞
To activate/deactivate Condition hold:
(Home screen)
(LINKAGE menu/MODEL menu)