Setting by curve type
When the curve type is selected as described above, adjustment buttons corresponding to the curve type appear
on the original screen. Adjust each curve as described below.
Linear curve adjustment
Rate A and Rate B can be adjusted separately or
simultaneously.
*[Separate] mode:
separately.
*[Combined] mode:
simultaneously.
1. Select the setting mode.
*Initial value: +100.0%
The curve can also be offset horizontally in the
vertical direction and the rate reference point can be
offset to the left or right.
*Initial value: +0.0%
move the reference point to the
left or right.
*Initial value: +0.0%
170
< Data >
(Linear curve)